solar racking systems,the best solar,solar panel rack,solar roof rack,ground screw

The  unique design of the solar mount allows the module to be adjusted  according to different regions and angles so as to make full use of the  local solar energy resources to achieve the maximum efficiency of the  solar modules. At  the same time, the detailed analysis and practice of the connection  mode, material selection and load analysis of the stent are made to make  it have good physical properties such as anti-seismic, anti-wind,  anti-snow pressure and corrosion resistance. Wide area.
Main material: Q195 Q195L Q235 Q235B Q345B AL6005-T5 and so on
Solar support common specifications (not listed specifications can be customized):
Inner edge C-shaped steel U-steel with reinforced teeth: hot-dip galvanized, hot-dip galvanized
41 * 30 * 10 * 8 * (1.5-2.5) 50 * 75 * 15 * 9 * (2.0 - 3.0)
41 * 21 * 10 * 7 * (1.5-2.5) 41 * 41 * 10 * 8 * (1.5-2.5)
41 * 52 * 10 * 7 * (1.5-2.5) 41 * 62 * 10 * 8 * (1.5-3.0)
41 * 72 * 10 * 8 * (1.5-3.0) 41 * 82 * 10 * 8 * (1.5-3.0)
60 * 60 * 15 * 10 * (1.5 - 3.0) 60 * 80 * 15 * 10 * (1.5 - 3.0)
60 * 70 * 10 * 8 * (1.5-3.5) 100 * 50 * 15 * 10 * (1.5-3.0)
C section steel Z section steel, U section steel:
60 * 40 * (1.5-3.5) 57 * 30 * 10 * (1.5-3)
68 * 50 * (1.5-3.5) 40 * 60 * 15 * (1.0-3.0)
80 * 40 * 15 * (1.5-3.0 60 * 50 * 15 * (1.5-3.5)
100 * 50 * 20 * (1.0-4.5) 100 * 40 * 15 * (1.5-3.5

Solar  photovoltaic solar energy photovoltaic power generation system in order  to place, install, fixed solar panel design of the special bracket. General materials are aluminum, stainless steel. Photovoltaic products are divided into floor, roof, wall, portable and so on
Large-scale photovoltaic power generation enterprises generally use galvanized metal materials. First,  lower cost, and second, carrying a larger and has a rotating device,  with the rotation of the sun to adjust their own point of view, high  light energy utilization.